RUSSELL AND DAWSON – AN ARCHITECTURE AND ENGINEERING FIRM (860) 289-1100 1111 Main Street, East Hartford, CT 06108-2241

    How can engineers reduce the cost of MEP systems in various buildings?

    MEP systems are vital in present-day structures since they establish an indoor climate that is reasonable for human inhabitance over prolonged periods. MEP establishments address an enormous part of development expenses, and they represent more than 30% of the spending plan in many structure projects.

    Luckily, there are numerous approaches to decrease the expense of MEP frameworks without influencing execution. With smart design choices, it might even be feasible to reduce expenses and improve a few parts of the project. Energy and water utilization are likewise decided in parts by the MEP design plan, and MEP engineers can save a huge number of dollars in utility charges every year.

    In this article, we will talk about some compelling procedures to lessen the expense of MEP system installations. For a developer, it is always advantageous to complete the development of any structure with zero change orders. Nonetheless, there are alternate approaches to decrease costs that are less known upfront.


    Many change orders are due to poor communication. For instance, if the measurements and installation prerequisites of hardware are expected wrongly, costly changes might occur during the development stage. By getting all stakeholders involved from the beginning, the plan necessities are clear and surprises can be avoided.

    Clear correspondence is particularly significant when utilizing prefabricated or modular construction techniques. For this situation, the structure is built with pre-assembled parts that are assembled at the site, mostly with built-in MEP systems. While this development technique is quicker, there is less adaptability for changes once the modules have been finished.

    Current advanced technologies like BIM 360 and other software can improve coordination among all the stakeholders associated with a building project. For instance, this software permits synchronous work on the same model, and conflicts among segments can be identified and corrected right away. Additionally, there are project management software to supplement design software which has some important features such as cloud-based document sharing.


    MEP systems consist of multiple frameworks, yet those utilizing the most space is frequently stowed away from sight. For instance, an office building will have a fleet of channel, funneling, and air pipes disguised behind walls and roofs. With ordinary 2D design software, tracking down a productive design for every one of these frameworks is difficult even for experienced engineering and Architectural Design Firms. Nonetheless, Revit software allows optimizing the layouts of MEP installations without much difficulty.

    An ineffective MEP format causes two kinds of costs: more materials and more labor. With each foot or channel, funneling or ventilation work that is wiped out from the plan, the project turns out to be more affordable.

    Getting project workers and suppliers involved from the beginning helps towards this objective. At the point when the areas, measurements and installation necessities of MEP parts are known, engineers and architects can track down the ideal design. However, if the information on the MEP systems is obtained perpetually while progressing towards the design phase of the project, tracking down a productive MEP format is more troublesome and causes design changes multiple times.


    Boilers, chillers, and different kinds of huge HVAC equipment are among the costliest MEP parts in building projects. The cost of these units is known by their nameplate limit. There is a typical pre-conceived notion that having large equipment is something better, however, you are spending more than needed. Moreover, over-sizing makes maintenance and support more costly.

    When a structure has a productive thermal envelope, it monitors indoor warmth all the more successfully during winter, while avoiding open-air heat during summer. Whereas a structure that has the minimum protection needed by code, this structure can maintain an agreeable temperature with less warming and cooling. Smaller size air conditioning equipment can be considered to reduce the upfront cost.


    The absence of planning can make a task more costly, regardless of whether you have an expert project worker or an accomplished project plan.

    For instance, if there is a lot of construction work when you start the project, you might be eased back somewhere related to the shortage of construction laborers. If you expect high activities at initial stage, the contractors can be notified well in advance to meet the requirements in advance.

    You might be compelled to pay double-time if there is a tight deadline to meet, making project cost overruns. There are also some occasional factors that you ought to consider when planning for the construction of a project. In the event that you intend to introduce a cooling system before the mid-year months, HVAC installers might be occupied with projects in various structures.


    MEP Designs are an integral part of the construction process. When the construction documentations and subtleties are clear, workers are less inclined to commit errors.

    Building Information Modeling (BIM) has arisen as an incredible asset for design and development, permitting a degree of detail that was impractical with 2D drafting software. BIM software can likewise distinguish clashes between building frameworks, guaranteeing they are rectified before the development stage.

    Preferably, the Engineering Design Firm ought to give construction administrations during development by site visits. Since they are managing their own plan, they can give better direction to the overall project worker and any subcontractors included.

    Related Posts

    The Future is here: Smart Building Technologies

    Today’s architects, engineers, and technologists are creating smart building technologies. These technologies are evolving fast. These innovations have the potential to transform our built environment. We are exploring how these advances are shaping smart buildings. They are shaping the present